Carbide staaf met koelvloeistofgat
Carbide staven met één koelmiddelkanaal
Deze blank is speciaal voor sommige CNC-bladen of -boren die een kanaal nodig hebben voor koelvloeistof om de verhoogde warmte af te koelen tijdens het snijden of boren op hoge snelheid. Standaardspecificatie en tolerantietabel, zie hieronder.
Buiten D (mm) | OD Tol. (mm) | Binnengat d (mm) | identiteitskaart Tol. (mm) | Gat centrum spreidingswaarde α | Lengte (mm) | L Tol. (mm) |
3.0 | +0,50/+0,30 | 0,5 | ±0.10 | 0,10 | 330 | +1.5 |
4.0 | +0,50/+0,30 | 0,8 | ±0.10 | 0,10 | 330 | +1.5 |
5.0 | +0,50/+0,30 | 0,8 | ±0.10 | 0,13 | 330 | +1.5 |
6.0 | +0,50/+0,30 | 1.0 | ± 0,15 | 0,15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 1.0 | ± 0,15 | 0,15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ± 0,15 | 0,15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.4 | ± 0,15 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.4 | ± 0,15 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.4 | ± 0,15 | 0,28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.8 | ± 0,15 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.8 | ± 0,15 | 0,34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.8 | ± 0,15 | 0,37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 2.0 | ±0,20 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 2.0 | ±0,20 | 0.40 | 330 | +1.5 |
17.0 | +0,80/+0,30 | 2.0 | ±0,20 | 0.47 | 330 | +1.5 |
18.0 | +0,80/+0,30 | 2.0 | ±0,20 | 0,50 | 330 | +1.5 |
19.0 | +0,80/+0,30 | 2.0 | ±0,20 | 0,50 | 330 | +1.5 |
20.0 | +0,80/+0,30 | 2,5 | ±0,25 | 0,50 | 330 | +1.5 |
21.0 | +0,80/+0,30 | 2,5 | ±0,25 | 0,50 | 330 | +1.5 |
22.0 | +0,80/+0,30 | 2,5 | ±0,25 | 0,50 | 330 | +1.5 |
23.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
24.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
25.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
26.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
27.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
28.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
29.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
30.0 | +0,80/+0,30 | 3.0 | ±0,25 | 0,50 | 330 | +1.5 |
Carbide staaf met twee rechte gaten
Deze blank is speciaal voor sommige CNC-bladen of boren die een kanaal nodig hebben voor koelvloeistof om de verhoogde hitte tijdens het snijden of boren op hoge snelheid af te koelen. Standaardspecificatie en tolerantietabel, zie hieronder.
Standaard staanplaats
Buiten Dia. Ø(mm) | OD Tol. (mm) | Binnen d (mm) | identiteitskaart Tol. (mm) | Afstand tussen ruimen | Gat centrum spreidingswaarde α | L mm | Tol. (mm) | |
mm | Tol. (mm) | |||||||
6.0 | +0,50/+0,30 | 0,8 | ±0.10 | 1.5 | ﹢0/-0,20 | 0,15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 0,8 | ±0.10 | 1.5 | ﹢0/-0,20 | 0,15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ± 0,15 | 1.5 | ﹢0/-0.30 | 0,15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.0 | ± 0,15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.0 | ± 0,15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.2 | ± 0,15 | 3.6 | ﹢0/-0.30 | 0,28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.2 | ± 0,15 | 3.6 | ﹢0/-0.30 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.2 | ± 0,15 | 3.6 | ﹢0/-0.30 | 0,34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.5 | ± 0,15 | 5.0 | ﹢0/-0.30 | 0,37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 1.5 | ± 0,15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 1.5 | ± 0,15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
17.0 | +0,80/+0,30 | 2.0 | ±0,20 | 6.2 | ﹢0/-0.30 | 0.47 | 330 | +1.5 |
18.0 | +0,80/+0,30 | 2.0 | ±0,20 | 6.2 | ﹢0/-0.30 | 0,50 | 330 | +1.5 |
19.0 | +0,80/+0,30 | 2.0 | ±0,20 | 6.2 | ﹢0/-0.30 | 0,50 | 330 | +1.5 |
20.0 | +0,80/+0,30 | 2.0 | ±0,20 | 6.2 | ﹢0/-0.40 | 0,50 | 330 | +1.5 |
21.0 | +0,80/+0,30 | 2.0 | ±0,20 | 6.2 | ﹢0/-0.40 | 0,50 | 330 | +1.5 |
22.0 | +0,80/+0,30 | 2.0 | ±0,20 | 6.2 | ﹢0/-0.40 | 0,50 | 330 | +1.5 |
23.0 | +0,80/+0,30 | 2.0 | ±0,20 | 7,5 | ﹢0/-0.40 | 0,50 | 330 | +1.5 |
24.0 | +0,80/+0,30 | 2.0 | ±0,20 | 7,5 | ﹢0/-0.50 | 0,50 | 330 | +1.5 |
25.0 | +0,80/+0,30 | 2.0 | ±0,20 | 7,5 | ﹢0/-0.50 | 0,50 | 330 | +1.5 |
26.0 | +0,80/+0,30 | 2.0 | ±0,20 | 7,5 | ﹢0/-0.50 | 0,50 | 330 | +1.5 |
Carbide staaf met twee spiraalvormige gaten
Koelvloeistofgat in het type spiraalvormige vorm is een nieuw onderdeel van onze productserie, hieronder is het maatdetail.
D (mm) | D tol. | TK | Tk tol | gat | Gat tol. | Toonhoogte | L+1,0 |
3.3 | +0.7 | 1.60 | ±0.10 | 0.40 | ±0.10 | 16.32 | 310/330 |
3.8 | +0.7 | 1.80 | ±0.10 | 0,50 | ±0.10 | 19.04 | 310/330 |
4.3 | +0.7 | 2.10 | ±0.10 | 0,60 | ±0.10 | 21,77 | 310/330 |
4.8 | +0.7 | 2.25 | ± 0,15 | 0,70 | ±0.10 | 24.49 | 310/330 |
5.3 | +0.7 | 2.40 | ±0,20 | 0,70 | ±0.10 | 27.21 | 310/330 |
5.8 | +0.7 | 2.40 | ±0,20 | 0,70 | ±0.10 | 29,93 | 310/330 |
6.3 | +0.7 | 2.40 | ±0,20 | 0,70 | ±0.10 | 32,65 | 310/330 |
6.8 | +0.7 | 3.30 | ±0,20 | 1,00 | ± 0,15 | 35,37 | 310/330 |
7.3 | +0.7 | 3.50 | ±0,20 | 1,00 | ± 0,15 | 38.09 | 310/330 |
7.8 | +0.7 | 3.80 | ±0,20 | 1,00 | ± 0,15 | 40.81 | 310/330 |
8.3 | +0.7 | 3.80 | ±0,20 | 1,00 | ± 0,15 | 43.53 | 310/330 |
8.8 | +0.7 | 4.20 | ±0,30 | 1,00 | ± 0,15 | 46,25 | 310/330 |
9.3 | +0.7 | 4.50 | ±0,30 | 1.40 | ± 0,15 | 48.97 | 310/330 |
9.8 | +0.7 | 4.50 | ±0,30 | 1.40 | ± 0,15 | 51.69 | 310/330 |
10.3 | +0.7 | 4.50 | ±0,30 | 1.40 | ± 0,15 | 54.41 | 310/330 |
10.8 | +0.7 | 4.50 | ±0,30 | 1.40 | ± 0,15 | 57.13 | 310/330 |
11.3 | +0.7 | 4.90 | ±0.40 | 1.40 | ± 0,15 | 59,86 | 310/330 |
11.8 | +0.7 | 5.40 | ±0.40 | 1.40 | ± 0,15 | 62.58 | 310/330 |
12.3 | +0.7 | 5.85 | ±0.40 | 1.40 | ± 0,15 | 65,3 | 310/330 |
12.8 | +0.7 | 5.85 | ±0.40 | 1.75 | ±0,20 | 68.02 | 310/330 |
13.3 | +0.8 | 6.10 | ±0.40 | 1.75 | ±0,20 | 70,74 | 310/330 |
13.8 | +0.8 | 6.40 | ±0.40 | 1.75 | ±0,20 | 73.46 | 310/330 |
14.3 | +0.8 | 6.70 | ±0.40 | 1.75 | ±0,20 | 76.18 | 310/330 |
14.8 | +0.8 | 7.00 | ±0.40 | 1.75 | ±0,20 | 78,9 | 310/330 |
15.3 | +0.8 | 7.30 | ±0.40 | 1.75 | ±0,20 | 81.62 | 310/330 |
15.8 | +0.8 | 7.60 | ±0.40 | 1.75 | ±0,20 | 84.34 | 310/330 |
16.3 | +0.8 | 7.90 | ±0.40 | 1.75 | ±0,20 | 87.06 | 310/330 |
16.8 | +0.8 | 8.20 | ±0.40 | 1.75 | ±0,20 | 89,78 | 310/330 |
17.3 | +0.8 | 8.50 | ±0.40 | 1.75 | ±0,20 | 92,5 | 310/330 |
17,8 | +0.8 | 8.80 | ±0.40 | 1.75 | ±0,20 | 95.22 | 310/330 |
18.8 | +0.8 | 9.35 | ±0.40 | 2,00 | ±0,25 | 100,67 | 310/330 |
19.3 | +0.8 | 9.70 | ±0.40 | 2,00 | ±0,25 | 103,39 | 310/330 |
19.8 | +0.8 | 9,75 | ±0,50 | 2,00 | ±0,25 | 106.11 | 310/330 |
20.3 | +0.8 | 9.90 | ±0,50 | 2,00 | ±0,25 | 108,83 | 310/330 |
Carbide staaf met drie spiraalvormige gaten
Sommige speciale, precieze vingerfrezen of boren hebben 3 spiraalvormige gaten nodig om betere snijprestaties te krijgen, we ontwikkelen speciaal hardmetalen staafblanks voor deze toepassing. Specificaties detail zoals hieronder:
Buitenste D (mm) |
OD Tol. (mm) |
TK (mm) |
Afstand tol. (mm) |
Innerlijke Dia. (mm) |
ID kaart (mm) |
Toonhoogte (mm) |
Toonhoogte Tol. (mm) |
|
6 | ﹢1.0/﹢0.6 | 2.75 | -0.4 | 0,7 | ±0.10 | 32,7 | -0.7 | 0,62 |
8 | ﹢1.4/﹢0.7 | 3 | -0.4 | 1 | ± 0,15 | 43.53 | -0,86 | 0,89 |
10 | ﹢1.4/﹢0.7 | 5 | -0.6 | 1.4 | ± 0,15 | 54.41 | -1.08 | 1.12 |
12 | ﹢1.4/﹢0.7 | 6 | -0.6 | 1.4 | ± 0,15 | 65,3 | -1,3 | 1.33 |
14 | ﹢1.5/﹢0.7 | 7 | -0.8 | 1.75 | ±0,20 | 76.18 | -1.51 | 1.56 |
16 | ﹢1.6/﹢0.7 | 8 | -0.8 | 1.75 | ±0,20 | 87.06 | -1,73 | 1.78 |
18 | ﹢1.7/﹢0.7 | 9.55 | -0.8 | 2 | ±0,25 | 97,95 | -1,95 | 2,00 |
20 | ﹢1.7/﹢0.7 | 10 | -1 | 2 | ±0,25 | 108,83 | -2.16 | 2.22 |
Lengte: 330+0/+1.5mm |